Product name Best appealing promotional gift for car renting
This product adopts electric generator for power generation to charge its inside 40mAh/3.6V chargeable lithium battery after commutating. The power stored is transformed to the LEDs for lighting. With a Torch Switch to control the model: 3LED on - Off.
Features:
1.Cranking for power, low noise but high efficiency.
2.3pcs Ultra bright LED lighting.
3.Emergency auto hammer
4.Emergency auto belt cutter
5.Newfangled design which can charge the light by cranking, energy saving
and no pollution. Need no batteries.
1) Main Technical Parameters:
The Max. Luminous flux | ≥12 Lm |
The Max. beam luminous intensity | ≥ 50000mcd |
Lighting time after 1 minute cranking | ≥15 Minutes |
Lighting time after full charged | ≥2hours |
Lighting distance(Center pointluminous intensity 0.2lux) | ≥10m |
Charging/discharging circle | ≥500 times |
LED lifetime | ≥100000 Hours |
The Max.power output of the brushless generator | ≥1.2w |
2) Main parts life-span:
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
3) Size and Weight:
Product size | 153x83x34mm |
Product weight | 131g |
4) Others:
Specification of built-in battery | Chargeable lithium battery Lir2032 :3.6V40mAh |
Material of main body | ABS |
Material of emergency hammer | High rigid steel |
Material of emergency belt cutter | High sharp knife |
Charging operation:
Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
Switch Operation:
Push the switch up the light is on, down the light is off
Cautions:
Don't point at eyes directly so as not to hurt the eyes.
Pay attention to the holding gesture when cranking so as not to hurt your fingers.
In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
b) please crank it for at least 1 minute or use USB charger to charge the light for a while once a month.
Do not place this product in where temperature or humidity is high.
Do not drop or hit this product.