emergency hammer with dynamo flashlight from China manufacturer

Price:	1.7~2.5 USD
Payment Terms:	T/T,L/C,
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: PD501

Production Capacity: 100000

Delivery Date: 20days~30days

Product weight: 131g

Beam luminous intensity: 40000mcd

Rechargeable Battery: 3.6v 40mAh lithium battery

Means of Transport: Ocean,Land,Air,

Packing: Color box/Display box/Blist...

Product size: 153x83x34mm

Luminous flux: 12 Lm

Lighting time after 1 minute cranking: 15 Minutes

Material of hammer: 45# high rigid steel

1.Car emergency hammer
2.3 LED torch
3.Car emergency belt cutter
4.Dynamo powered, need no battery
5.ABS material

product name 4in1 dynamo emergency auto safety hammer with 3 LED torch

This product adopts electric generator for power generation to charge its inside 40mAh/3.6V chargeable lithium battery after commutating. The power stored is transformed to the LEDs for lighting. With a Torch Switch to control the model: 3LED on - Off.

Features:

1.Cranking for power, low noise but high efficiency.

2.3pcs Ultra bright LED lighting.

3.Emergency auto hammer

4.Emergency auto belt cutter

5.Newfangled design which can charge the light by cranking, energy saving

and no pollution. Need no batteries.

1) Main Technical Parameters:

The Max. Luminous flux	≥12 Lm
The Max. beam luminous intensity	≥ 50000mcd
Lighting time after 1 minute cranking	≥15 Minutes
Lighting time after full charged	≥2hours
Lighting distance(Center pointluminous intensity 0.2lux)	≥10m
Charging/discharging circle	≥500 times
LED lifetime	≥100000 Hours
The Max.power output of the brushless generator	≥1.2w

2) Main parts life-span:

Switch	≥10000 Times
The whole unit	≥5 Years
The plastic part	≥5 Years

3) Size and Weight:

Product size	153x83x34mm
Product weight	131g

4) Others:

Specification of built-in battery	Chargeable lithium battery Lir2032 :3.6V40mAh
Material of main body	ABS
Material of emergency hammer	High rigid steel
Material of emergency belt cutter	High sharp knife

Charging operation:

Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.

Switch Operation:

Push the switch up the light is on, down the light is off

Cautions:

Don't point at eyes directly so as not to hurt the eyes.

Pay attention to the holding gesture when cranking so as not to hurt your fingers.

In order to assure the using life of the battery and the mechanical parts, please pay attention to the instructions below:

a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.

b) please crank it for at least 1 minute or use USB charger to charge the light for a while once a month.

Do not place this product in where temperature or humidity is high.

Do not drop or hit this product.

The product will be a little heated when cranking for a long time.

picture of 4in1 dynamo emergency auto safety hammer with 3 LED torch