Product name 3 LED hand cranking Solar flashlight
Features:
1 adopts 3-phase brushless generator, low noise but high efficiency.
2.Absorb solar energy for power, green and environment protection.
3.3 LED Ultra bright lighting.
4.Newfangled design which can charge the light by cranking, energy saving
and no pollution. Need no batteries.
5.Newfangled design which can be used in the bicycle and also hand LED torch.
1) Main Technical Parameters:
The Max. Luminous flux | ≥12 Lm |
The Max. beam luminous intensity | ≥ 50000mcd |
Lighting time after 1 minute cranking | ≥15 Minutes |
Lighting time after 30mins chargingby light energy | ≥10 Minutes |
Lighting time after full charged | ≥2hours |
Lighting distance(Center pointluminous intensity 0.2lux) | ≥10m |
Charging/discharging circle | ≥500 times |
The Max.power output of the brushlessgenerator | ≥1.5w |
LED lifetime | ≥100000 Hours |
Main body material | ABS |
2) Main parts life-span:
Switch | ≥10000 Times |
The whole unit | ≥5 Years |
The plastic part | ≥5 Years |
3) Size and Weight:
Product size | 86x44.3x36mm |
Product weight | 80.2g |
4) Others:
Specification of built-in battery | Chargeable lithium battery Lir2032 :3.6V40mAh |
Solar Panel: | 5.4v,5mAh amorphoussilicon cell panel |
Charging operation:
1.Crank to charge its inside battery: hold the unit and crank the handle by the other hand at the speed of 3 circles per second to charge its inside battery.
2.Put the flashlight in the sunlight, it will be charged automaticly.
[Switch Operation]
Push the switch to control 1LED on-3LED on-Flashing-off
[Cautions]
1. Don't point at eyes directly so as not to hurt the eyes.
2. Pay attention to the holding gesture when cranking so as not to hurt your fingers.
3. In order to assure the using life of the battery and the mechanical parts, please pay attention to the
instructions below:
a) When the light is dim, it means the battery is lack of power badly, please turn off the light or crank it for a while.
b) please crank it for at least 1 minute once a month.
4. Do not place this product in where temperature or humidity is high.
5. Do not drop or hit this product.
6. The product will be a little heated when cranking for a long time.
We reserve the right to change the specifications of the hardware and software described in this manual without prior notice.
Picture of 3 LED hand cranking Solar flashlight
Pictures of LED dynamo solar bike light when fix a bicycle holder spare parts: